CAD Scrub Mitt Grit Guard & Filter

Price
£14.99
In stock and ready for shipping

Pickup available at Birmingham

Usually ready in 2 hours (Mon-Fri 11am-4pm)

View store information

Free Shipping - Spend over £40*

TRUSTED BY PROFESSIONALS

CAD Scrub Mitt Grit Guard & Filter

CAD Scrub Mitt Grit Guard & Filter

Price
£14.99

Product information

CA Detailing Scrub Guard – Advanced Wash Mitt Cleaning System

The CA Detailing Scrub Guard is designed to keep your wash mitt or pad cleaner than ever, significantly reducing the risk of wash-induced swirls and scratches. Unlike traditional grit guards that sit at the bottom of the bucket, our angled Scrub Guard features an ergonomic washboard surface that actively removes dirt, grit, and debris from your mitt, ensuring a safer, more effective wash. This is the perfect add on to ensure your wash mitts are removed of dirt. 

Key Features:

Triple-Action Cleaning – Filters out dirt and grit, scrubs contaminants off your mitt, and doubles as an external washboard for rinsing.
Swirl & Scratch Prevention – Removes loose particles before they can damage your paintwork.
Ergonomic Washboard Design – The curved surface allows for effortless agitation, keeping your mitt clean between sections.
Secure Fit – Designed to fit snugly in CA Detailing's 20L and 13L buckets, preventing grit from re-entering the wash solution.
Ideal for Rinseless Washing – Perfect for water-conscious detailing routines.

How to Use:

  1. Place the Scrub Guard in a smooth-sided, tapered bucket for a secure fit.
  2. Fill the bucket with water and your preferred shampoo.
  3. Agitate your mitt against the Scrub Guard to release trapped dirt before returning it to the vehicle.
  4. For additional cleaning, remove the guard and use it as an external washboard to rinse and dry your mitt or pad.

Achieve a safer, swirl-free wash every time with the CA Detailing Scrub Guard – the essential upgrade for any detailing setup.

FAQs

Q: Why use a grit guard?

A: Grit guard helps trap dirt and debris at the bottom of the bucket, preventing contaminants from reattaching to your wash mitt and reducing the risk of swirls and scratches on your car's paintwork.

Q: How does the Scrub Mitt Grit Guard work?

A: It sits at the bottom of your wash bucket, allowing you to rub your mitt or sponge against it to release dirt. The filter keeps grit and particles trapped below, ensuring cleaner water for your wash process.

Q: What size buckets do these work with?

A: Our CAD Scrub Guard is flexible and can flex to fit nearly all buckets. If in doubt, purchase the CA Detailing bucket set.

Q: How do I clean the Scrub Mitt Grit Guard & Filter?

A: Simply rinse it with clean water after each wash to remove trapped dirt and debris. Periodically, you can scrub it with a soft brush for a more thorough clean.

Q: Do you need two grit guards?

A: While one grit guard is effective, using two grit guards—one in the wash bucket and one in the rinse bucket—is the best way to minimise the risk of swirls and scratches.

  • Single Grit Guard: Helps remove dirt from your wash mitt but may still allow some contaminants to mix with the wash water.
  • Two Grit Guards (Two-Bucket Method): The first grit guard in the rinse bucket removes dirt before dipping into the clean wash bucket, ensuring a safer wash process.

For the best car detailing results, using two grit guards is highly recommended!