Bilt Hamber Auto-Wheel - Non-Acid, Non-Alkaline

Auto-Wheel is a non-acid, non-alkaline alloy wheel cleaner, and in most cases, no agitation is required.

In most cases, steel and alloy wheels are either lacquered or painted. These coatings protect the metallic surface from corrosion and provide attractive finishes to automotive road wheels.

As vehicles brake, the dust generated from pads, discs and drums is at elevated temperatures. Amongst this hot cloud are thousands of hot metallic particles. These bombard the wheel’s finish and effectively embed themselves there. Once lodged these particles are extremely difficult to remove.

Acid-based alloy wheel cleaners attack the metal particles effectively, reducing their size and allowing the particles and clinging dirt to escape. Caustic alloy cleaners are less effective than acid ones on brake dust, but can attack organic coatings such as lacquers and paints on short exposure. They attack any organic matter accumulated around the embedded particles and produce a seemingly clean surface, however with continued use they will dull and diminish the coating, leaving a wheel surface that needs refinishing.

The more effective and safe to use Auto-Wheel works in an entirely different way, and has proved itself by winning yearly independent tests conducted by the UK’s biggest selling automotive magazine! Most recently in 2017, when we were up against both powerful acid and alkaline cleaners. – See the test here! 

Auto-Wheel’s formulation reacts with the oxidising surface of the metallic particles, rendering it water-soluble. The rapid removal of this microscopically rusted surface reduces the embedded particle size and releases the particles from the surface. Unlike acid-based alloy wheel cleaners, this method is harmless to the wheel’s finish. The reaction can be observed by a rapid colour change from clear to deep red. After a simple hose, rinse down or jetwash, it leaves the wheel spotless. In severe cases, the included wheel brush can be used to assist the process.

1 litre Auto-Wheel is supplied with a trigger spray.

How To Use
Spray auto-wheel liberally onto your wheels.
Avoid directly spraying the centre caps of the wheels.
Wait for the colour changing reaction, normally 3-5 minutes depending on level of contamination.
Now simply wash the wheel down with a hose or jetwash.

FAQs

Q: How do you use Bilt Hamber auto wheel?

A: Spray Bilt Hamber Auto-Wheel generously onto your wheels, targeting dirt and brake dust while avoiding direct application to centre caps by spraying in an outward direction. Wait 1-5 minutes for the product to activate, turning red as it dissolves contaminants. For tougher grime, agitate with a soft brush during the reaction period. Rinse thoroughly with a hose or pressure washer for a spotless, professional finish.