CarPro Cherry IronX Fallout Remover - Alloy Cleaner

CarPro - Iron X is a highly effective, acid-free and pH balanced (6~7pH) car paint, wheels & glass cleaner (safe for all wheels including aluminium and alloys). CarPro Iron X is effective and safe for use on all car surfaces and will not deteriorate clear coats.

Airborne chemical compounds and ferrous particles - particles containing iron - actually penetrate the paint and create corrosive compounds that eat deep into the paint's sub-layers or paint’s pin-holes. This is a gradual process that often is not evident until it's too late. Claying or polishing only removes the particle, not its effects, which are continuing to spread beneath the surface. During the use of your vehicle, brake dust and road grime become sintered to the surface of the car paint, rims and wheels due to the high temperature conditions they are normally exposed. Brake dust contains high levels of iron and once sintered to the rim, becomes extremely difficult to dissolve or remove without the use of harsh chemicals.

CarPro - Iron X opens up the paint's pores to release ferrous particles and to neutralise caustic compounds that have developed in the paint's subsurface. Ongoing damage is immediately stopped and future damage is prevented by removing the ferrous particles.

CarPro - IronX sprays on as a thick, transparent, as the cleansing liquid begins to work into the dirt and grime, the formula begins to turn purple/ red. The purple/red coloration is the Iron-X Cleaner forming a bond to the sintered iron on the car paint and wheel and changing its state to a water soluble complex for easy removal. Stubborn, baked on grime may take a small amount of agitation.

Rinse car paint and wheels thoroughly with a power washer and wipe dry.

How to Use Iron X:

1. Wash the car or wheels surfaces, make sure surface is cool.
2. Shake well, spray CarPro - Iron X on the surface, rub it in with damp sponge thoroughly, wait 5 mins while contaminants change its colour to purple / red, wipe off with damp soft sponge. Don’t let the Iron Cut dry completely on surface!
3. Rinse well or power wash the whole surface. Car is now ready to clay!